Table of Contents
Advertisement
HomeSecure HS-IP-03 manual: 22-01-2015
Frequently Asked Questions
How do I connect my IP camera to the internet?
Connect one end of the network cable to your router and the other end to your IP camera.
How do I use my iPhone or Android phone with the IP camera?
Please see the section [5 App Setup].
How do I get my IP camera to send pictures to my email?
The IP camera can send pictures to your email when alarm is triggered and with fixed
intervals.
See section [4.3.3 Email] for alarm email setup, and [4.4.2 Timed Capture] picture emails with
fixed intervals.
How do I connect my IP camera to my wireless network?
Please refer to section [4.2.3 Wifi]. Remember, the network cable must be connected until
wifi has been set up properly.
Is it necessary to make all settings again if the power supply has been disconnected?
No, all settings are savede ven if the camera has been without power.
Can I upgrade the IP camera firmware?
Yes, you can. But only with firmware that has been approved by HomeSecure. See download
section on
www.homesecure.org
and our retailers' website. Men kun med firmware der er
godkendt af HomeSecure og HomeAlarm. Se download sektionen på HomeAlarms
hjemmeside for de nyeste firmware (www.homealarm.dk/download)
I have installed the search tool but I cannot find the IP camera in the overview?
Make sure that your IP camera and your computer are connected to the same network. Both
devices must be in the same IP address range. If your computer has IP address 192.168.0.55
then your IP camera must also be in the 192.168.0.xx range.
The easiest way to make sure that both devices are in the same network, is to connect the
computer and the IP camera to the same router with cable and set the computer to be
allocated IP address automatically through DHCP on the router.
41
Copyright © 2015 HomeSecure
Advertisement
Table of Contents
