Motion Detection - HomeSecure HS-IP-03 User Manual

4.3.1 Motion Detection

Set the camera to trigger alarm by movement in the picture.
Enable/disable motion detection.
Activate the whole picture to detect
motion.
Choose a level of sensitivity for the
chosen area. Test a few times if you are in
doubt.
Click [Refresh] to update info.
Choose the area in the picture that you
wish to be able to detect motion. Double
click each field you want to activate.
Deactivate all fields.
Click [Save] to save settings.
Copyright © 2015 HomeSecure
HomeSecure HS-IP-03 manual: 22-01-2015
23