Table of Contents
Advertisement
4.2.1 IP (Internet Protocol Settings)
The basic network settings of the IP camera. DHCP and DNS are both set to Enable as standard. We
recommend that you keep this setting unless you are familiar with setting up network settings.
Enable/disable automatic allocation of IP
address. If enabled, the IP address cannot be
changed manually.
IP Camera Subnet Mask
DNS (Domain Name Service). Set to Enable to
obtain automatically.
Input alternate DNS server.
Click [Refresh] to update info.
If you are planning to connect your IP camera to the wireless network, you should
setup wifi first and then return to this page to finish network setup.
When the camera is connected to the wireless network, it will be allocated new IP
and MAC addresses.
Copyright © 2015 HomeSecure
HomeSecure HS-IP-03 manual: 22-01-2015
Local IP address of the IP camera.
Used to access the camera locally.
The IP address must be unique.
IP address of the standard gateway
(router), used on the local network.
Input preferred DNS server.
Click [Save] to save changes.
18
Advertisement
Table of Contents
