Radio Operations - Scott SRX190 User Manual And Installation Instructions

Radio Operations

Press the MODE button to select the radio mode.
To select a radio band
In radio mode, Press the BAND
bands: ->FM 1-> FM 2 -> FM 3 ->.
Auto/ Manual tuning( FM 50KHz/step)
- Automatic search mode:
Press the or button, the automatic search will start. It will search upward or downward for the strong signal radio station
within the current band. "AUTO" appears on the LCD display.
Press and hold the or
- Manual search mode:
Press the or button repeatedly to manually search upward or downward step by step for the desired radio station within
the current band. For fast manual searching, press and hold the
In manual search process, if the both buttons haven't been pressed within 5 seconds, it will change into automatic search
mode automatically. "AUTO" appears on the LCD display.
To store / recall a preset radio stations
You can store up to a total of 18 radio stations in the memory (18 FM), manually or automatically.
- To store a station:
- Select a band (if needed)
- Select a station by or
- Hold a Preset button (M1-M6) for at least 2 seconds.
- To recall a station:
- Select a band (if needed).
- Press a preset button (M1-M6) briefly to recall the stored station. In case of RDS mode, the strongest AF is selected after AF
searching.
Auto store / Preset scan
- Preset scan:
Press the AMS button to scan each preset station. If the field strength level is more than the threshold level, the radio will
hold at this preset station for 5 seconds with sound output, then go to next station until all 6 FM stations are scanned, finally
the radio will play at the preset station where scanning started. The preset station number on the LCD will flash during the
process. Press the AMS
button repeatedly to select
button until "MANUAL" appears on LCD display, it will change into manual searching mode.
buttons, refer to auto / manual tuning.
again to stop preset scan.
one of the three radio broadcasting
or button.
GB-14