Scott SRX190 User Manual And Installation Instructions page 12

" INITIAL VOL" (initial volume) :
"INVOL 17" will be visible on the LCD display. Ppress the
CLOCK "ADJUST" (adjust the clock time):
"ADJ 00.00" will be visible on the LCD display. Press the
minute.
"TA VOL" (traffic announcement volume):
This function allows you to define the minimum volume for the traffic announcements. The adjustable range is 0~45. The
defaulted value is 17. Press the
"EON" ON/OFF:
Press the VOL + or VOL -
"DSP" (equaliser mode):
The car audio device is equipped with 4 preset equalizer modes. Press the VOL + or VOL button (or the EQ button) to select
one of the following EQ modes: DSP NONE"
(normal). When using preset EQ modes, you cannot have access to Bass and Treble settings.
"LOUD" :
Press the VOL + or VOL -
"LOC" (local stations):
In urban areas, most stations are strong enough and "LOCAL ON" mode should be selected. Switch to LOCAL OFF mode to
search for stations with weaker signals.
STEREO/MONO:
FM station is received in stereo mode. However, if the signal
MONO mode usually improves the overall sound quality.P
audio effect.
"ALRM" (alarm function) :
Press the VOL+ or VOL- button to choose "ALRM ON" or "ALRM OFF".
Mute on/off
When the unit is switched on, briefly press the
switched off when the VOL+
VOL + or VOL - button to adjust the volume of the traffic announcements.
button to choose "EON ON" or "EON OFF".
g
"
"DSP CLAS" (classical)
button (or press and hold down the
(Power) / MUTE button to switch mute on or off. The mute will be also
or VOL- MODE BAND , ,
VOL+ or VOL- button to adjust the initial volume of theis unit.
VOL + to adjust the hour, and press the
g
"DSP ROCK"
LOUD button) to choose switch the loudness on or off.
is weak or reception is not as good as you would like, switching to
ress the VOL + or VOL -
is pressed.
GB-11
VOL - button to adjust the
g g
"DSP POP" "DSP FLAT"
button to choose FM STEREO or MONO