802.1X - D-Link DCS-7513 User Manual

Section 3: Configuration
This page lets you set up 802.1x authentication for your camera. Your network devices, intermediary switches, and RADIUS server must support
and enable 802.1x. After making any changes, click the Save button to save your changes.
IEEE 802.1x:
Enable this to use IEEE 802.1x authentication.
EAP Type:
Select the EAP type used by your 802.1x server.
Identity:
Enter the identity issued by your certificate authority.
Password:
Enter the password issued by your certificate authority.
CA Certificate: Click Browse... and select your CA certificate file on your computer, then
click the Upload button to upload it to the camera.
Status:
This will show information about the current CA certificate that was uploaded
to the camera. To remove the CA certificate, click the Delete button.
D-Link DCS-7513 User Manual

802.1x

69