Deploying The Camera - D-Link DCS-7513 User Manual

Section 2: Installation

Deploying the Camera

Before deploying the camera to a fixed location, it is recommended that you take a photo from the desired location to ensure an adequate field of
view.
Step 1
Position the alignment sticker in the desired location making sure the camera and mounting
bracket have sufficient space. Use the dimension diagrams in Technical Specifications on
page 86 for additional reference.
Step 2
Use a 6 mm drill bit to make the holes approximately 30 mm deep.
Step 3
Remove the alignment sticker.
Step 4
Insert the wall anchors and affix the mounting plate using the screws provided.
D-Link DCS-7513 User Manual 19