D-Link DCS-7513 User Manual page 57

Section 3: Configuration
Recording
Here you can configure and schedule the recording settings. After making any changes, click the Save button to save your changes.
Recording Enter a name for the recording.
Entry Name:
Enable This Select this to enable the recording function.
Recording:
Priority: Set the priority for this entry. An entry with a higher priority value will be
executed first.
Source:
Select the video profile to use as the recording source.
Recording
Use the checkboxes to set which days to record video on. Select Always to
Schedule:
record for the entire day, or select From and select what period of time you
want to record using the dropdown boxes.
Destination:
Select where the recording file will be stored. You should set up a Server
entry for a network storage drive first.
Total cycling
Please input a HDD volume between 1 MB and 2 TB for recording space. The
recording size:
recording data will replace the oldest record when the total recording size
exceeds this value. For example, if each recording file is 6 MB, and the total
cyclical recording size is 600 MB, then the camera will record 100 files in the
specified location (folder) and then will delete the oldest file and create new
file for cyclical recording.
Please note that if the free HDD space is not enough, the recording will stop.
Before you set up this option please make sure your HDD has enough space,
and it is better to not save other files in the same folder as recording files.
Size of Each
If this is selected, files will be separated based on the file size you specify.
File for
Recording:
D-Link DCS-7513 User Manual 57