Table of Contents
Advertisement
How to use your machine
General Operation
Regular
Heavy
1. Switch the machine on: the front lights
and display will light up and the lid will
open.
2. Select the mode that you would like to
sand your disc for, depending on the
severity of damage, by selecting either
the Regular or Heavy option – located on
the User Keypad.
NO BLU-RAY
Blu-ray
cannot be used in this
machine.
1. Place disc onto the Turntable Assembly,
with the label side facing down!
Warning: Do not attempt to repair
Blu-ray Discs in this machine, they will
get damaged beyond repair.
2. Close the Lid and the cycle will start
automatically.
3. Once the cycle has completed, the Lid will
open automatically. Remove your disc and
proceed to the final repair in your disc
repair machine.
Page 4
Advertisement
Table of Contents
