Table of Contents
Advertisement
Getting Started
Unpacking
SAVE ALL PACKING MATERIALS. Failure to use packaging designed
for this unit can cause damage and void warranty.
There is a charge for replacement packing materials.
Parts that need to be saved are as follows:
• VMI Quicksand Shipping Box
• Top Cardboard Insert
• Left & Right Side Packing Foams
• Protective Plastic Bag
1. Carefully open the box.
2. Remove the Top Cardboard
Insert - which contains the
machine's starter supplies,
accessories, and support
documents.
3. Remove the VMI Quicksand
from the shipping box.
4. Remove the Left and the Right
side packing foams.
5. Take the VMI Quicksand out of
the protective plastic bag.
6. Position the machine on
a sturdy flat surface with
sufficient working room around
it.
The Parts of the Machine
Nozzle
Sanding
Pad
Catch
Tray
Chip
Port
Pump
Page 1
Water Feed
On / Off
Switch
Power Inlet
Water
Reservoir
Foam Pad
Center Hub
Jet Nozzle Extender
Turntable
Assembly
Keypad
Water Level
Display
Advertisement
Table of Contents
