CDI CD42-T1A User Manual page 16

GETTING STARTED CD42 T1
Installing Ba eries
Load T1 Ba ery Carousel with six (6) AA-Cell
alkaline ba eries. Posi ve terminal (+)
is always opposite tension spring.
NOTE: it is good prac ce to
always install new ba eries
prior to deployment.
Replace carousel as shown.
I Inspect cap and O-ring before replacing. t and O ring before replacing
Ensure O-ring is serviceable. A bri le and/or deformed O-ring may not
properly seal. Lubricate O-ring with a light coa ng of petroleum jelly
if dry.
Ensure O-ring groove and screws are clean
and free of ruptures, dents,
or other damage.
22 Hz ELECTROMAGNETIC TRANSMITTER USER GUIDE
(6) AA-Cell
al (+)
.
ws are clean
Page 16 of 52