Front I/O Panel - HP ProLiant SL165s G7 Maintenance And Service Manual

NOTE: For SFF Hard Drive installation, refer to HP 2 Drive SFF cage installation instruction documentation for
more information.
WARNING: Ensure that the system is powered off and all power sources have been disconnected
from the server. Voltages are present at various locations within the server whenever an AC power
source is connected. This voltage is present even when the main power switch is in the off position.

Front I/O Panel

To remove the front I/O panel:
Unfasten the screws that secure the front I/O panel to the tray.
1.
Remove the front I/O panel.
2.
Figure 8 Removing the front I/O panel
To install the Front I/O panel:
Align the front I/O panel to the tray.
1.
Fasten the screws.
2.
Removal and Replacement Procedures 36