HP ProLiant SL160s Installation Instructions Manual
Hp proliant sl160s g6 server installation instructions
Hide thumbs
Also See for ProLiant SL160s:
- User manual (10 pages) ,
- Implementation manual (26 pages) ,
- Overview (20 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HP ProLiant SL160s
Summary of Contents for HP ProLiant SL160s
-
Page 1: Installation Instructions
HP ProLiant SL160s G6 Server Installation Instructions Part Number 635239-002... -
Page 2: Identifying Server Components
Identifying server components Front Panel Components SL160s G6 Server Front Panel Components Figure 1 Front panel components of the s6500 chassis with 4 SL160s G6 servers Item Description Serial port VGA port Top: USB 2.0 Port Bottom: USB 2.0 Port Top: NIC2 Connector Bottom: NIC1 Connector Server 1... -
Page 3: Rear Panel Components
Rear Panel Components Item Designator Description Serial Port (COM1) Figure 2 Rear panel components of the s6500 chassis with 4 SL160s G6 servers VGA Port Top: USB 2.0 Port Bottom: USB 2.0 Port Top: NIC port2 Bottom: NIC port1 CPU2 DIMM 9C slot (from left to right) CPU2 DIMM 8F slot CPU2 DIMM 7I slot CPU2 DIMM 6B slot... -
Page 4: Server Configuration Resources
You need to remove the tray from the chassis before you can remove or installation of options, refer to any installation instructions that replace a tray component. came with the option, as well as the HP ProLiant SL160s G6 Server Maintenance and Service Guide. To remove the tray: For safety information, regulatory notices, and detailed •... -
Page 5: Installing The Hard Disk Drive
SATA hard disk drives. Memory Socket NOTE: For specific supported hard drive configurations and cable routing, refer to HP ProLiant SL160s G6 Server NOTES: Maintenance and Service Guide located on the HP website: • Installation guide for 1P configuration: http://www.hp.com/support/ProLiant_SL160sG6_MSG_en... -
Page 6: Installing The Processor
Installing the Processor Align the processor installation tool with the socket and install the processor. THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. NOTE: If one processor is being installed, it should be installed in the socket furthest from the IOH/chipset. Figure 10 Installing the processor To install the new processor: CAUTION: Failure to completely open the processor locking... - Page 7 Press the tabs on the processor installation tool to separate it from Figure 13 Installing the PCI air baffle the processor, and then remove the tool. Figure 11 Removing the processor installation tool Figure 14 Detail information for installing the PCI air baffle Close the processor socket retaining bracket and the processor locking lever.
-
Page 8: Installing The Cpu Air Baffle
Use a pattern of five dots when applying the thermal interface For additional documentation, refer to HP ProLiant SL160s G6 Server material—one dot in the center, and one dot at each corner. Easy Set-up CD. You can also access additional information and documentation from the HP external website, either by connecting directly or through the Easy Set-up CD.