Rewinding/Fast Forwarding; General Information On Recording; Preparation For Recording; One Touch Recording - Philips FW M355 User Manual

Rewinding / Fast forwarding
1
Stop playback, press à or á.
The tape will stop automatically at the end of
rewinding or fast forwarding.
2
Press Ç to stop rewinding or fast forwarding.
Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example).
General information on
recording
For recording, use only tape of IEC type I
(normal tape).
The recording level is set automatically,
regardless of the position of the Volume, DBB,
DSC and so forth.
The tape is secured at both ends with leader
tape. At the beginning and end of
the tape, nothing will be recorded
for six to seven seconds.
To prevent accidental recording,
break out the tab on the left
shoulder of the tape side you want
to protect.
If "CHECK TAPE" is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening.
pg 001-031/M355/37-Eng
Tape Operation / Recording
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 2.

Preparation for recording

1
Press TAPE to select tape deck 2.
2
Load a recordable tape into tape deck 2 with full
spool to the left.
3
Prepare the source to be recorded.
CD – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
When recording is in progress
REC
It is not possible to listen to another source,
except tape dubbing.
It is not possible to activate the timer function
during recording or tape dubbing.

One touch recording

1
Press CD 1/2/3, TUNER or AUX to select the
source.
2
Start playback of the selected source.
3
Press RECORD to start recording.
To stop recording
Press Ç on the system.
23
starts flashing.
3139 115 21402
4/17/02, 12:55 PM
23