Table of Contents
Advertisement
Rewinding / Fast forwarding
1
Stop playback, press à or á.
➜ The tape will stop automatically at the end of
rewinding or fast forwarding.
2
Press Ç to stop rewinding or fast forwarding.
Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example).
General information on
recording
G For recording, use only tape of IEC type I
(normal tape).
G The recording level is set automatically, regardless
of the position of the Volume, DBB, DSC and so
forth.
G The tape is secured at both
ends with leader tape. At the
beginning and end of the tape,
nothing will be recorded for
six to seven seconds.
G To prevent accidental
recording, break out the tab
on the left shoulder of the
tape side you want to protect.
G If "CHECK TAPE" is displayed, the protection
tab has been broken. Put a piece of clear
adhesive tape over the opening.
Tape Operation/Recording
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 2.
Preparation for recording
1
Press TAPE to select TAPE 2.
2
Load a recordable tape into tape deck 2 with full
spool to the left.
3
Prepare the source to be recorded.
CD – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
When recording is in progress
➜
starts flashing.
REC
G It is not possible to listen to another source,
except tape dubbing.
G It is not possible to activate the timer function
during recording or tape dubbing.
One touch recording / Recording
the mixed sound
versions)
1
Press CD, TUNER or AUX to select the
source.
2
Start playback of the selected source.
3
Press RECORD to start recording.
To stop recording
G Press Ç on the system.
Note:
– One Touch Recording is not possible in TAPE
mode, "SELECT SOURCE" is displayed.
(not available for all
21
Advertisement
Table of Contents
