Factory Reset; Midi Pedalboard; Importing Organ Sound Set (User 1/2); Deleting Organ Sound Set (User 1/2) - Johannus One User Manual

Piston Setting
ON

Factory Reset

[FUNCTION/EXIT] button 8
This function allows you to recall the ONE's original factory settings. Please
see "Restoring the Factory Settings (Factory Reset)" (p. 32).

MIDI PedalBoard

[FUNCTION/EXIT] button 9
Piston Setting
Enable
Disable

Importing Organ Sound Set (User 1/2)

[FUNCTION/EXIT] button 10
The ORGAN [USER 1] and [USER 2] sets are only available after installing
optional new organ sound set into the ONE.
Sound Set
The ONE gives you the possibility to install new organ sound sets
from:
‰ JOHANNUS ONE Official Sounds (.DXS extension)
These sounds will be available and downloadable from the following
website:
http://www.johannus.com
You can import User Sound Set in the internal memory of the ONE
and use them in your performances. To import you need an USB
Memory and your Personal computer.
Loading a organ sound set in the USB Memory
1.
Using your computer, download the Sound Set from the JOHANNUS web
site (.DXS).
2.
Insert the USB Memory into the USB port of your computer.
3.
Create two folders "/SOUND/ORGAN/USER1" and "/SOUND/ORGAN/USER2" in
the root of the USB Memory.
44
Explanation
The Keyboard is connected to
the internal sound generator.
(DEFAULT)
Explanation
Select "Enable" if you connect
a MIDI PedalBoard to the MIDI
IN socket on the ONE's rear
panel.
The PEDAL section is
played by the pedalboard.
See "Playing the PEDAL
section with a pedalboard"
(p. 22).
(DEFAULT)
Select "Disable" if you
connect another type of MIDI
device to the MIDI IN socket
on the ONE's rear panel.
4.
Copy the Organ Sound Set (.DXS) into the USB Memory's "/SOUND/ORGAN/
USER1" folder if you want to load them into "USER 1" location or "/SOUND/
ORGAN/USER2" folder for the "USER 2" location.
5.
Disconnect your USB Memory safely.
Importing the organ sound set
6.
Insert an USB Memory that contains Organ Sound Sets. See "Connecting an
USB Memory (commercially available)" (p. 18) .
7.
Enter in function mode selecting the [10] tilt tab. See "General procedure"
(p. 42).
The [10] tilt tab indicator lights steady.
8.
Press the appropriate piston:
The [1], [2] memory pistons indicate the possible choices:
Status Explanation
Flashes Empty (Free)
Lights steady It contains a sound set
Piston
Select "1" if you loaded the organ sound set in the "/
SOUND/ORGAN/USER1" folder.
Select "2" if you loaded the organ sound set in the "/
SOUND/ORGAN/USER2" folder.
The [10] tilt tab indicator flashes and at the end the sound set is imported.
To select the organ sound set imported please refer to "Selecting Various Organ
Types" (p. 21).
NOTE
When all tilt tabs are flashing they indicate an error during the import. If
this happens, please check the sound set file and the path in the Memory
USB.

Deleting Organ Sound Set (User 1/2)

[FUNCTION/EXIT] button 20
The [1], [2] memory pistons indicate the possible choices:
Status Explanation
Flashes It contains a sound set
Lights steady Empty (Free)
Piston
Select "1" to remove the USER 1 organ sound set.
Select "2" to remove the USER 2 organ sound set.

USB Remove

[FUNCTION/EXIT] button 30
Before unplugging the USB Memory, use this function to safely remove it.
See "Safely Remove the USB Memory" (p. 18)
Advanced Functions
Explanation
Explanation