Autoiris Lens Connector - GE GEC-HDR User Manual

4 GEC-HDR/GEC-HDR-DN
User Manual
Video output terminal.
F
Onboard controls.
G
Slide out cover.
H
Power pilot LED.
I
12 VDC/24 VAC block terminal. This terminal
accepts 12 VDC (nonparity) or 24 VAC. The other
J
model accepts 100 - 240 VAC.
OSD remote control connector.
K
Brightness level sensor.
L

Autoiris lens connector

If your autoiris lens has a built-in EE amp (video
type), set the LIGHT CNTL to Video lens. With
this setting, the connector in Figure 2 on page 5
should be wired as shown in Table 1.
Table 1.
Pin
1
2
3
Built-in EE amp pinout
Description
Power (red)
NC
Video (white)