Table of Contents
Advertisement
Figure 5. The OSD program.
5. Click the center button to display the
Main Menu on the display monitor. Use
the arrow buttons or your PC's keyboard
to navigate and select menu items.
6. Click on Exit to close the program.
Note:
Try the following steps if the OSD Control
program doesn't function as stated.
•
Make sure the RS-232 cable is wired
correctly.
•
Run the patch.exe program on the
provided floppy disk.
•
Click on the Setup (S) button to make
sure the correct COM port is selected.
Chapter 2
Controls
11
Advertisement
Table of Contents
