boso CA01 User Instructions page 23

Measurement display
Blood pressure is a dynamic parameter and
can be affected by the patient's position,
e.g. sitting, standing, lying, moving, before
or during the measurement, physical con-
dition (stress, disease, etc.).
➡ If the measurement result is obviously
wrong, repeat the measurement.
The unit switches itself to time display
mode automatically after about 1 min. To
repeat a measurement,
START/STOP button again briefly.
54
2
min
➡ If no further measurement is required,
remove the cuff from the arm.
➡ Enter each individual value in your
record card.
press the
Allow at least two minutes be-
tween measurements.