Using Bluetooth - Brookstone Big Blue 200 Manual

USINg blUETOOTH

1. Prepare your device to pair using Bluetooth
33 feet of Big Blue 200. Refer to your device's owner's manual for details if
necessary.
2. With the Big Blue 200 powered on, press and hold the POWER/PAIRING
BUTTON until the LED RING starts pulsing.
3. The Big Blue 200 is in pairing mode when the LED RING and BLUETOOTH
MODE LED INDICATOR are pulsing. Big Blue 200 will wait for a connection
in pairing mode for up to 120 seconds.
4. Once Big Blue 200 is in pairing mode and your device is ready to pair, select
"BB 200 XXXX." Each Big Blue 200 has a unique identifier. If prompted,
use 0000 as a PIN for the pairing code.
5. O nce "BB 200 XXXX" is selected, the LED RING will change to solid and
the BLUETOOTH MODE LED INDICATOR will start flashing blue to confirm
®
pairing is complete.
Note: To cancel the pairing mode, wait the 120 seconds for Big Blue 200 to
cancel pairing automatically. The lED RING will return to solid and the unit
will remain on.
14
®
® , making sure you are within
Flashing blue
6. When audio is streaming, the BLUETOOTH
blue.
®
7. When audio is not streaming, The BLUETOOTH
flashing blue.
8. Use VOLUME + on Big Blue 200 to increase the volume. The VOLUME
LEVEL LED INDICATORS show the volume level for 5 seconds.
9. Use VOLUME - on Big Blue 200 to decrease the volume. The VOLUME
LEVEL LED INDICATORS show the volume level for 5 seconds.
MODE LED INDICATOR is solid
®
Solid blue
MODE LED INDICATOR is
®
Flashing blue
15