Big Blue 200 Software Updates; Wi-Fi Settings Reset - Brookstone Big Blue 200 Manual

bIg blUE 200 SOFTWARE UPdATES

As updates become available, the Big Blue 200's software will automatically update
when the Big Blue 200 is connected to a Wi-Fi network.
1. During a software update, the Wi-Fi STATUS LED INDICATOR will pulse orange.
2. When the software update is complete, the Wi-Fi STATUS LED INDICATOR will
turn solid red for a few seconds, change to breathing white for a few seconds
and may turn off for several seconds as the Big Blue 200 reboots.
Solid red
3. After booting is complete, the Wi-Fi STATUS LED INDICATOR will flash yellow
(Aux mode), indicating Big Blue 200 is ready to Cast.
Note: A software update may occur while audio is streaming. Audio streaming
will stop while the Big Blue 200 is being updated. After the update is complete,
tap the Cast button in your Chromecast-enabled app to resume audio.
20
Pulsing orange
Pulsing white
Flashing yellow

Wi-Fi SETTINgS RESET

1. With Big Blue 200 powered on, press and hold the Wi-Fi
BUTTON until the LED RING turns off (approximately 5 seconds). The Wi-Fi
STATUS LED INDICATOR is solid white for several seconds while the Big Blue
200 resets.
2. After reset is complete, the Wi-Fi STATUS LED INDICATOR is solid red for
several seconds while the Big Blue 200 is booting up. The Wi-Fi STATUS
LED INDICATOR may turn on and off during the booting up process. This is
normal.
3. After booting is complete, the Wi-Fi STATUS LED INDICATOR continuously
flashes white, indicating the Big Blue 200 is ready to be connected to a
Wi-Fi network through the Google Home app.
® SET UP/RESET
Solid red
Flashing white
21