Using Chromecast Built-In; Grouping Speakers With Chromecast Built-In - Brookstone Big Blue 200 Manual

USING CHROMECAST BUIlT-IN

1. After Big Blue 200 has been set up in the Google Home app, tap the Cast
button in any Chromecast-enabled app and select the Big Blue 200 in the
list of available devices.
Note: It may take a few minutes for a Chromecast-enabled app to recognize
the Big Blue 200 as an available device. Refresh or quit and reopen the
Chromecast-enabled app if the Big Blue 200 does not appear as an available
device.
2. Audio will stream from the Chromecast-enabled app to Big Blue 200 over
Wi-Fi. The Wi-Fi MODE LED INDICATOR is solid white to indicate Big Blue
200 is in Wi-Fi mode.
3. When audio is streaming, the Wi-Fi STATUS LED INDICATOR is solid green.
4. When audio is not streaming, the Wi-Fi STATUS LED INDICATOR is flashing
green.
12
Solid green
Solid white
Flashing green
Solid white
5. Use VOLUME + on Big Blue 200 to increase the volume. The VOLUME
LEVEL LED INDICATORS show the volume level for 5 seconds.
6. Use VOLUME - on Big Blue 200 to decrease the volume. The VOLUME
LEVEL LED INDICATORS show the volume level for 5 seconds.

GROUPING SPEAkERS WITH CHROMECAST BUIlT-IN

Speakers set up in the Google Home app can be grouped together to stream the
same audio content.
1. Connect each speaker to the same Wi-Fi network through the Google Home app
(refer to page 9 for set up instructions).
2. Tap the menu icon on a speaker that has been set up in the Google Home app
and select "Create Group."
3. Select at least two speakers for the group and enter a name for the group.
4. Tap Save.
5. The group will appear as an available connection when the Cast button
tapped in Chromecast-enabled apps. It make take a few minutes for streaming
to begin on all speakers.
6. Access the speaker group in the Google Home app to control play/pause or
control the volume of each speaker.
is
13