Charging The Speaker; Turning The Speaker On; Pairing Your Device; Turning On - Brookstone 850022 Manual

CHARGING THE SPEAKER

1. Insert the included Charging Cable's DC connection into the Charging Port.
2. Insert the USB end of the Charging Cable into a USB power source (not included).
3. The Light Ring will turn red when the speaker is charging. When the speaker is
fully charged, the Light Ring will turn off.

TURNING THE SPEAKER ON

1. Press and hold the Power Button once to turn on.
2. Press and hold the Power Button again to turn off.
3. When the battery is low, the speaker will make three tones and shut down. Fully
charge your speaker before playing again.

PAIRING YOUR DEVICE

1. Activate Bluetooth on your device.
2. Turn the Speaker ON and if it is the first use, the speaker will automatically
enter pairing mode. If it is not the first use, enter pairing mode by holding
down the VOLUME UP and VOLUME DOWN buttons together for 2 seconds
and you hear a string of tones to indicate pairing mode.
3. Search the available Bluetooth devices and select "Floating Speaker". Enter
"0000" if prompted for a PIN code.
4. You will hear a string of tones when you are connected.
5

ANSWERING INCOMING CALLS

If you receive a call while paired to the speaker, the music will pause. Answer the
call on your phone as you would. When the call is complete, music will resume.

SHOWER USES

Stand the speaker in the corner of your tub or shower, or use the included
shower hook and lanyard to hang from your shower head.

BLUETOOTH DEVICES

The speaker pairs with devices that use the Advanced Audio Distribution Profile
(A2DP). A2DP dictates how audio is streamed from one device to another over a
Bluetooth ® connection.
CARE AND STORAGE
Store the unit in a dry, cool place when not in use.
6