Grouping Speakers With Chromecast Built-In; Big Blue 100 Software Updates; Using Bluetooth - Brookstone 318418 User Manal

GROUPING SPEAKERS WITH CHROMECAST BUILT-IN

Speakers set up in the Google Home app can be grouped together to stream the same
audio content.
1. Tap the menu icon on a device that has been set up in the Google Home app and
select "Create Group."
2. Select at least two speakers for the group and enter a name for the group.
3. The group will appear as an available connection when the Cast button is tapped
in Chromecast-enabled apps.
4. Access the speaker group in the Google Home app to control play/pause or control
the volume of each speaker.

BIG BLUE 100 SOFTWARE UPDATES

As updates become available, the Big Blue 100' s software will automatically update when
the Big Blue 100 is connected to a Wi-Fi network.
During a software update, the WI-FI STATUS LED INDICATOR will pulse orange.
When the software update is complete, the WI-FI STATUS LED INDICATOR will turn solid
red for a few seconds, change to breathing white for a few seconds and then turn off
for several seconds as the Big Blue 100 reboots. After booting is complete, the WI-FI
STATUS LED INDICATOR is solid yellow (Aux mode), indicating Big Blue 100 is ready to
Cast.
Note: A software update may occur while audio is streaming. Audio streaming
will stop while the Big Blue 100 is being updated. After the update is complete,
tap the Cast button in your Chromecast-enabled app to resume audio.
12

USING BLUETOOTH

®
1. Prepare your device to pair using Bluetooth
33 feet of Big Blue 100. Refer to your device's owner's manual for details if
necessary.
2. With the Big Blue 100 powered on, press and hold the POWER/PAIRING
BUTTON until the LED RING starts pulsing.
3. The Big Blue 100 is in pairing mode when the LED RING and BLUETOOTH
MODE LED INDICATOR are pulsing. Big Blue 100 will wait for a connection
in pairing mode for up to 120 seconds.
4. Once Big Blue 100 is in pairing mode and your device is ready to pair, select
"BB 100 XXXXX." Each Big Blue 100 has a unique identifier. If prompted,
use 0000 as a PIN for the pairing code.
5. O nce "BB 100 XXXXX" is selected, the LED RING will change to solid and the
BLUETOOTH MODE LED INDICATOR will start flashing to confirm pairing is
®
complete. When audio is streaming, the BLUETOOTH
will change to solid.
Note: To cancel the pairing mode, wait the 120 seconds for Big Blue 100 to
cancel pairing automatically. The LED RING will return to solid and the unit
will remain on.
6. Use VOLUME + on Big Blue 100 to increase the volume. The VOLUME
LEVEL LED INDICATORS show the volume level for 5 seconds.
7. Use VOLUME - on Big Blue 100 to decrease the volume. The VOLUME
LEVEL LED INDICATORS show the volume level for 5 seconds.
, making sure you are within
®
®
® MODE LED INDICATOR
13