Panasonic CF-18 Series Reference Manual page 5

Key Combinations
Hotkey Settings
There are two Fn key functions as follows:
Fn key lock function
After Fn is pressed once, it stays in the "pressed" position until another key is
pressed. This is convenient when it is difficult to press two buttons simultaneously.
Popup windows display ON/OFF
Settings
1
Run the Hotkey Settings.
Windows 2000
Select [Start]-[Programs]-[Panasonic]-[Hotkey Settings].
Windows XP
Select [Start]-[All Programs]-[Panasonic]-[Hotkey Settings].
2
Set the parameters.
Add the check mark if you want to enable the Fn key lock function.
The following Fn key lock function will then be enabled.
To use Fn only once:
To use Fn successively:
This setting is only available when [Use Fn key lock] is checked.
[Make sounds when Fn key is pressed]*
Notifies the user with a sound when Fn is pressed, locked, or released.
[Show status on screen]:
Displays the Fn key status on the taskbar.
: Fn is locked
: Fn is not locked
Add the check mark if you want to turn the popup window display function OFF.
The full-screen display of [Command Prompt] screen or MPEG files may change to
a window display if Fn
popup window display function OFF .
3
Select [OK].
NOTE
The Fn key lock function also works with
2
aside from Fx * .
Each user can select separate settings for whether or not to use the Hotkey settings.
1
* If MUTE is set, you will not hear a beep
2
* " Fx " indicates any function key from
1 Press Fn once. (Locked)
2
Press another key for combination. (Lock released)
1
Press Fn twice. (Locked)
2 Press another key for combination.
Fn key remains locked until Fn is pressed once
more.
1
:
2
+ Fx * keys are pressed. To prevent this, turn the
Fn and other keys (e.g.,
.
F1 to F10 .
5
, )