Panasonic CF-18 Series Reference Manual page 11

Touch Pad
(Advanced)
When you want to use an external mouse through the external
keyboard/mouse port of the port replicator
When an external mouse or trackball with additional functions (e.g., wheel function)
is connected, a part or all of the additional functions may fail to operate. To use these
additional functions, perform the operation below.
If you are using a USB mouse, the following operation is unnecessary.
Windows 2000
1
In [Control Panel] - [Add/Remove Programs], select [touchpad/touchscreen] and
then select [Change/Remove] to delete it, then select [Yes] to confirm the dele-
tion.
• The display will ask you to restart Windows. Select [No].
2 Power off your computer (
external mouse or trackball device to the computer.
3
Turn the power on and run the Setup Utility (
[Touch Pad] and [Touchscreen] to [Disable].
4 Close the Setup Utility by pressing F10 . At the confirmation message, select
[Yes].
5 Log on to Windows with the administrator authority by using the keyboard. (Up to
step 6 , use the keyboard for all operations. The mouse will not function until the
computer restarts. Applications can be changed with Alt + Tab .)
6
Restar t your computer by using the keyboard (
Down").
7 Following the operating instructions of the connected external mouse, install the
necessary driver.
Windows XP
1
In [Control Panel] - [Add or Remove Programs], select [touchpad/touchscreen]
and then select [Change/Remove] to delete it, then select [Yes] to confirm the
deletion.
2 When the message "The uninstallation was completed." is displayed, select [OK].
3 In [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -
[Device Manager] - [Mice and other pointing devices], select [touchpad/touch-
screen], then select [Roll Back Driver] at [Driver].
At the confirmation message, select [Yes].
4 Select [Close].
• The display will ask you to restart Windows. Select [No].
5 Power off your computer (
external mouse or trackball device to the computer.
6 Turn the power on and run the Setup Utility (
[Touch Pad] and [Touchscreen] to [Disable].
7 Close the Setup Utility by pressing F10 . At the confirmation message, select
[Yes].
8 Log on to Windows with the administrator authority (only necessary when mul-
tiple accounts are created).
9 If the display asks you to restart Windows, select [Yes].
10
Following the operating instructions of the connected external mouse, install the
necessar y driver.
"Starting Up/Shutting Down") and connect the
page 63). In [Main] menu, set
"Starting Up/Shutting
"Starting Up/Shutting Down") and connect the
page 63). In [Main] menu, set
11