Panasonic CF-18 Series Reference Manual page 19

Software Keyboard
NOTE
You can also start up the software keyboard using the following procedure.
Windows 2000
Select [Start] - [Programs] - [Panasonic] - [Software Keyboard].
Windows XP
Select [Start] - [All Programs] - [Panasonic] - [Software Keyboard].
If you want to press shor tcut key, after pressing one key (the key turns blue),
press the second key in a continuous manner. For example, if you want to type
Ctrl + C , after pressing
When using two or more keys in combination ( Ctrl + C etc.), use the internal
keyboard or the software keyboard alone.
When Fn is pressed, the function key will change to the display shown below.
(The Fn key function does not work on the Windows logon screen or the Wel-
come screen.)
Ctrl + Alt + Del cannot be input through the software keyboard (except
when logging on).
If you press the space bar while the software keyboard is selected, the screen
will appear as though the space bar on the software keyboard has been pressed
repeatedly. In this case, select the title bar of the software keyboard.
Depending on the language, some keys are displayed in orange. These keys are
used to input characters such as "ê", "ö", etc. You can set input languages for
each application. ( Windows help) The software keyboard will switch to the
keyboard layout in the language set for the selected application.
To select the language, use the language bar (e.g.
software keyboard layout does not change to the language you have set, select
the title bar of the software keyboard then select the application again. Even if
the language bar display does not match the language set for the application, the
input will be correct as long as the keyboard layout changes into the appropriate
language.
Characters cannot be input through the software keyboard when the [Command
Prompt] screen is set to "Full Screen".
The software keyboard may not work while Windows is in the process of shutting
down. Be sure to save the all data before shutting down or restarting Windows.
Ctrl , Press C .
) on the taskbar. If the
19