Trouble Shooting - Husqvarna PP490 Operator's Manual

Trouble shooting

Error messages - WS (wall saw)
In case of any defects, an error message (1) and a fault code (2) appears on the display in the remote control. Follow
the directions supplied or contact an authorized dealer. Error messages are illustrated in the language you have chosen
on the product alternatively in English.
Please observe, the illustration shows an example.
2
F08 TRAVEL MOTOR
OVERLOADED
Please check and/or adjust:
(1) Diamond tool for wear
(2) Feed speed and straightness of cut
(3) Saw carriage
Measures for acknowledging fault messages:
• Press "OK" on the display. No further action is required if the fault message is deleted.
If the fault persists, follow the instructions given in the troubleshooting guide or get in touch with an authorized dealer.
The power unit software can be updated. Contact your service agent for further information.
MAINTENANCE
1
OK
OK
MENU OK
English – 19