Pentair MagicBowl Water Effect Installation And User Manual page 9

INSTALLING THE MAGICBOWL
(AFTER ELECTRICAL REQUIREMENTS ARE MET)
WATER LEVEL
Figure 1.
1. Install the MagicBowl niche in the customer supplied pedestal or mounting
surface, see Figure 1.
Note: The niche is PVC so use PVC cement to connect the water line and
electrical conduit and drain line to the niche.
2. Set the niche in the mounting surface as per current local building codes.
3. Backfill around the niche to the top of the flange, thereby securing the niche into
place.
4. The niche should be installed so that the "finish grade" taking into account tile or
finish surface, is no higher than the top flange of the niche.
™
NICHE
6.2"
1" (2.54 cm)
Schedule 40 PVC
1.5" Water Line
MAGICBOWL WATER EFFECT Installation and User's Guide
WATER EFFECT AND NICHE
Pedestal,
Pool Deck
or Surface
1" (2.54 cm) PVC
Electrical Conduit
The niche flange must
be flush with the top
finished surface of the
bowl mounting surface
5