Using An External Transformer For Multiple Magicbowl Water Effects; Maximum Wattage When Using Multiple Firefx Led Light And Intellibrite Color Led Lights (Using A 300 Watt Transformer); Powering On The Firefx Led Light - Pentair MagicBowl Water Effect Installation And User Manual
With firefx led light for pool and spa
Table of Contents
Advertisement
2
Using an External Transformer for Multiple MagicBowl™ Water Effects
When using multiple FireFX™12 VAC LED Lights on a 100 Watt transformer, it is
recommended that no more than three (3) FireFX LED lights be used. It is also
recommended not to exceed 150 feet of total cable run between the transformer and
lights. Note: For long cable lengths, set transformer to 14 VAC, and use only FireFX
LED lights with the 150" cord option, see diagram below.
100 Watt
Transformer
Maximum wattage when using multiple FireFX LED Lights and
®
IntelliBrite
Color LED lights (using a 300 Watt Transformer)
IMPORTANT! When using multiple 12 VAC FireFX LED Light, IntelliBrite
IntelliBrite Landscape Lights, the total allowable light wattage is 300 Watts maximum.
A transformer should only be loaded to 80% of its capability. For example, a 300 watt
transformer should have a maximum of 240 watts attached to it. FireFX LED Light and
IntelliBrite LED light wattages are as follows:
•
One FireFX LED Light is 25 Watts maximum
•
One ColorVision
•
One IntelliBrite Color LED Pool Light is 30 Watts maximum
•
One IntelliBrite Color LED Spa Light is 18 Watts maximum
•
One IntelliBrite Landscape Light is 15 Watts maximum
•
One MagicStream
•
One GloBrite
•
One AmerBrite
•
One AmerBrite White LED (400W) Pool light is 44 Watts maximum
•
One AmerBrite White LED (300W) Pool Light is 36 Watts maximum
•
One AmerBrite Color LED Pool Light is 36 Watts maximum
Note: If multiple LED lighting is being used, it is recommended that these lights be run
independent of each other, using a separate transformer for each group or type of light.
Otherwise all lights connected to the same transformer will be working together.
Powering On the FireFX LED Light
When the FireFX LED light is powered on, the light will begin to flicker different shades
of red, orange, yellow to mimic the glow of fire. This flickering is normal and is the
intended mode of operation.
MAGICBOWL Water Effect Installation and User's Guide
12 Gauge
J Box
(Minimum)
150 ft.
™
Light is 15 Watts maximum
®
Laminar Light is 16 Watts maximum
®
LED Pool Light is 15 Watts maximum
®
White LED (500W) Pool Light is 51 Watts maximum
Note: If a longer cable
run is necessary, it is
recommended that
separate 100 Watt
12 VAC transformers
be used for each
light with no more
than 150 feet of total
cable run between the
transformer and lights.
®
Light and
Hide quick links:
Advertisement
Table of Contents
