Connect To Macintosh Computer; Update Firmware - Pandigital 7” Color Multimedia eReader User Manual

5. When the message "It is now Safe to Disconnect Hardware" appears,
you can disconnect the USB cable from your eReader and computer.

Connect to Macintosh Computer

1. Connect the small end of the USB cable to the eReader mini USB port, and
the larger end to an available USB port on your computer.
2. Macintosh recognizes the eReader as an external storage device titled
PD_NOVEL
3. Drag and drop files between the two devices as you normally move files.
Disconnect from Macintosh
1. To safely disconnect from your Macintosh, select the
your desktop and press
2. When the icon is no longer on the desktop, it is safe to unplug the USB
cable.

UPDATE FIRMWARE

Before you perform a firmware upgrade, make sure the device is fully charged or
connected to the power adaptor.
Personal settings will be deleted during the upgrade process (i.e., email account
setup, Wi-Fi network setup, etc.).
IMPORTANT: This firmware update procedure is only available for Windows PC
1. On your computer, go to www.pandigital.net/downloads.
2. Select the correct location and product model.
3. Choose the "
4. When prompted, you can either
Run method may result in a slower process than saving & running the program
directly from your computer).
5. Follow the prompts in the
firmware into your device.
6. After the download is complete, turn the device off.
7. Press the
5 seconds, and then release both.
.
users at this time. We recommend Mac users to locate a Windows PC
that can be used for the firmware update at this time. Mac based
update procedures will be available in future.
Update with Your PC
Upgrader
Volume +
key plus slide the
Command-e
to eject the disk.
" option.
Save
the program or
window to connect your device and install the
power key on
56
PD_NOVEL
Run
it from the website. (The
simultaneously for
icon on