Keyboard Introduction - Magnimage LED-510 User Manual

Keyboard Introduction

1. Input Buttons
Press any of the input selection button, such as 'HDMI', the source will be
switched to HDMI.
2. Control Buttons
Press the 'PIP' button, it will control PIP function:
PIP
Source
Then press the 'LEFT' /'RIGHT' button to control PIP function.
Press the 'PART' button, it will display part and full-screen state：
PART
Then press the 'LEFT' /'RIGHT' button to switch part or full-screen display
output.
Press the 'AUTO' button, LCD screen will display the automatically adjust
interface：
When automatic adjustment is completed, the system will automatically return.
Press the 'CUT' button, it will display the quickly switching interface：
1
2
First to set the horizontal width and vertical height of PIP equal with the main
output picture, and then press the 'CUT' button, switch the input source
between 1 and 2, also can press the other input source directly to change for
switch, and press the 'MENU' button to exit.
Auto Adjusting
Please Waiting
27
ON
DVI
On
AVI
VGA