Measuring Mode - Co 2 - Automatic Measurement" Screen - E+E Elektronik OMNIPORT 30 Operating Manual

Hand-held meter

Hide thumbs Also See for OMNIPORT 30:

Table of Contents

The operating manual is used to ensure optimal operation and functioning of the device.

E+E Elektronik® Ges.m.b.H. provides no warranty of any kind on this publication and no liabili-

ty for improper use of the products described.

To ensure perfect functioning, these operating instructions must be read carefully and

observed before the transmitter is commissioned. These instructions must be provided to all

persons responsible for mounting, commissioning, operation, inspection, maintenance and

repair.

These operating instructions must not be used for the purposes of competition without our writ-

ten permission and must not be forwarded to third parties. Copies may be made for internal

purposes. All information, technical data and technical diagrams included in these instructions

were correct in accordance with the data available at the time of writing.

The company E+E Elektronik GmbH reserves the right to make modifications at any time and

without prior notification, with no update requirement on models produced before the modifica-

tion date. For this reason, we request that you contact our customer service department, quot-

ing the device number, designation and type given on the nameplate.

Table of Contents

Need help?

Do you have a question about the OMNIPORT 30 and is the answer not in the manual?