Daikin E-Series Service Manual page 298

SiBE12-818
Step
5 Disconnect the
connectors one by one
starting from your side.
6 Remove the control
PCB.
2. Removing the reactor
1 Remove the screw.
2 Remove the 3 screws
and lift the reactor
upward to remove it.
Removal Procedure
Procedure
Connectors
For inverter PCB
Connectors
For SPM PCB
Connectors
For display PCB
Connector S10: For relay
PCB
Connectors H1/H2: For DB
(diode bridge), power wire
harnesses
AC2 (black)
(R6431)
(R6432)
(R6433)
(R6434)
Outdoor Unit
Points
S33 & S71:
S31 & S32:
S51 & S101:
AC1 (red) and
287