Daikin E-Series Service Manual page 174

SiBE12-818
FVXS 25/35/50 F
Adjusting the Airflow Direction
You can adjust the airflow direction to increase
your comfort.
To adjust the horizontal
blade (flap)
1. Press "SWING button
• "
flaps will begin to swing.
2. When the flap has reached the
desired position,
press "SWING button
once more.
• The flap will stop moving.
• "
To adjust the vertical
blades (louvers)
Hold the knob and move the louver.
(You will find a knob on the left-side and the right-
side blades.)
Notes on flap and louvers angle
• Unless "SWING" is selected, you should set the
flap at a near-horizontal angle in HEAT mode and
at a upward position in COOL or DRY mode to
obtain the best performance.
ATTENTION
• When adjusting the flap by hand, turn off the unit,
and use the remote controller to restart the unit.
• Be careful when adjusting the louvers. Inside the
air outlet, a fan is rotating at a high speed.
Operation Manual
" is displayed on the LCD and the
" disappears from the LCD.
".
"
HEAT
1, 2
COOL/
DRY
Instruction
163