3.3 AV, DVI, Temp Board and Speaker Removal
1. Remove 1 screw A (M4 × 8) to release grounding wires.
2. Pull the Rear Panel ass'y upward.
3. Remove 4 screws B (T3 × 6) and remove the AV Board.
4. Remove 4 screws C (T3 × 6) and remove the DVI Board.
5. Remove 4 screws D (T2.6 × 6) and remove the speaker.
6. Remove 1 screws E (T3 × 8) and remove the Sensor Board.
DVI board
3.4 Front Panel and R/C Board Removal
1. Remove 3 screws A (M3 × 4), 1 screw B (M3 × 8) and unhook 2 hooks C at the both of
left and right side, and the take the Front Panel ass'y off.
2. Remove 1 screw D (T3 × 8) to take the R/C Board off.
Temp board
E
C
B
C
B
B
B
C
D
D
A
Fig. 2-7
A
A
B
D
Fig. 2-8
2-5
Part 2: Repair Information
AV board
Speaker
A
R/C board
C