Part 2: Repair Information
4.5 Relay Lens-Out Disassembly
1. Remove 2 screws A (M2.5 × 6) and pull the Relay Lens-Out ass'y upward.
2. Remove 2 screws B (M2 × 4) to take the Lens off from the holder.
Note: There is no mounting direction of the lens.
4.6 Polarized Glass-In Removal
1. Remove each screw (M2.5 × 6) and pull the Polarized Glass-In ass'y upward.
2. Unhook the stoppers and take the glass off upward.
A
A
Fig. 2-21
Fig. 2-22
2-12
Holder
Relay Lens-Out
* Should be places the glass as the film
attached side comes to the prism side.
B
B
Phase Sheet
Polarized Glass-In
Hooks