Table of Contents
Advertisement
How to check lamp used time
The LAMP REPLACEMENT indicator will
illuminate when the total lamp used time
reaches 2000 hours.
The total lamp used time is calculated by
using the below expression,
Total lamp used time = Teco + Tnormal (1+1/3)
Teco: used time in the Eco mode
Tnormal : used time in the Normal mode
This is to indicate that lamp replacement is
required.
You can check the lamp used time following to the below procedure.
1. Press and hold the
2 The lamp used time in each normal mode and eco mode and total used time are
displayed on the bottom right corner of the screen briefly.
button on the projector for more than 20 seconds.
2-19
Part 2: Repair Information
Lamp Age
0100
Normal
:
0025
Eco:
0158
Total lamp used time
HOURS
HOURS
HOURS
Advertisement
Table of Contents
