Table of Contents
Advertisement
3. Tools & Test Equipment
The following tools and equipment are required to perform disassembly, reassembly and
adjustment.
1) Special Tools
None
2) General Purpose Tools (Commercially available, but can be purchased with the
following numbers.)
Description
Ball Driver
Hex Key Set
Driver, adjustment
Driver, Slot
Driver, Cross-point
3) Test Equipment
Description
Digital Multi-meter
Video Signal Generator Commercially available Color Bars and
Computer Signal
Generator
Oscilloscope
4) Other Equipment
Description
Screen
Personal Computer
5) Chart/Software
Description
Monitor Tester
Gray Scale Chart
Color Shading
Correction Tool
Tool No.
CY9-5002-000
CY9-5007-000
CY9-5003-000
CY9-5004-000
CY9-5005-000
Tool No.
Commercially available DC1mmV~500V
Commercially available Gray Scale
Commercially available 100MHz response or
Tool No.
Commercially available Over 40"
Commercially available Windows 95 OS
Tool No.
Supplied with manual Bitmap Data
Supplied with manual (XGA and SVGA)
Supplied with manual Ver. 3.02
Specification
2.0mm
2.0mm
1.8mm
4.0mm
No. 2
Specification
Gray Scale
(or personal computer)
over
Specification
(with a floppy disk)
Specification
II
Remarks
Optical Parts Removal
& Adjustment
Optical Parts Removal
& Adjustment
Electrical Adjustments
Optical Parts
Adjustment
Assembly &
Disassembly
Remarks
Electrical Adjustment
Electrical Adjustment
Electrical Adjustment
Waveform checks
Remarks
All Adjustment
All Adjustment
Remarks
Electrical Adjustment
Electrical Adjustment
White Uniformity
Adjustment
Advertisement
Table of Contents
