Clock Functions - Zanussi ZOA35802BK User Manual

Clock functions

Clock functions table
Clock function
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
Setting the time. Changing the time
You must set the time before you operate the
oven.
The flashes when you connect the appliance
to the electrical supply, when there was a
power cut or when the timer is not set.
Press the or to set the correct time.
After approximately five seconds, the flashing
stops and the display shows the time of day you
set.
To change the time of day press
again until starts to flash.
Setting the DURATION
1. Set an oven function and temperature.
2. Press again and again until
flash.
3. Press or to set the DURATION time.
The display shows
4. When the time ends,
acoustic signal sounds. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions and
the knob for the temperature to the off
position.
Setting the END
1. Set an oven function and temperature.
8
To set, change or check the time of day.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To set countdown time. This function has no effect on the operation
of the appliance. You can set the MINUTE MINDER at any time, also
when the appliance is off.
again and
starts to
.
flashes and an
Application
2. Press again and again until
flash.
3. Press or to set the time.
The display shows
4. When the time ends,
acoustic signal sounds. The appliance
deactivates automatically.
5. Press any button to stop the signal.
6. Turn the knob for the oven functions and
the knob for the temperature to the off
position.
Setting the TIME DELAY
1. Set an oven function and temperature.
2. Press again and again until
flash.
3. Press or to set the time for
DURATION.
4. Press .
5. Press or to set the time for END.
6. Press to confirm.
Appliance turns on automatically later on, works
for the set DURATION time and stops at the set
END time. At the set time an acoustic signal
sounds.
7. The appliance deactivates automatically.
Press any button to stop the signal.
8. Turn the knob for the oven functions and
the knob for the temperature to the off
position.
starts to
.
flashes and an
starts to
www.zanussi.com