Rear Combination Light Assembly - Subaru 2001 FORESTER Service Manual

REAR COMBINATION LIGHT ASSEMBLY

Lighting System
18. Rear Combination Light
Assembly
S914426
A: REMOVAL
S914426A18
1) Remove rear quarter upper and lower trim.
<Ref. to EI-39 REMOVAL, Rear Quarter Trim.>
2) Remove nuts and disconnect connector.
S6M0045
3) Attach adhesive cloth tape to body area around
rear combination light.
4) Using a standard screwdriver, carefully pry rear
combination light off.
CAUTION:
¼ Do not pry on the rear combination light
forcefully as this may scratch the vehicle body.
B: INSTALLATION
S914426A11
Install in the reverse order of removal.
CAUTION:
¼ Remove all traces of adhesive tape from
body before installation.
¼ Attach butyl rubber tape to back of rear com-
bination light before installing rear combina-
tion light on body for sealing purposes.
LI-50