Bail Cable Adjustment (20 Inch Mowers) - Jacobsen 32251 Technical Manual

10 ADJUSTMENTS

10.3 BAIL CABLE ADJUSTMENT (20 INCH MOWERS) _______________________________

Adjust the bail cable to remove excess movement.
Make sure the bail cable is inserted in the correct slot in the throttle
lever.
• When the standard handle is installed, the bail cable must be
in the upper slot.
• When the optional tapered handle is installed, the bail cable
must be in the lower slot.
Use the cable adjuster as required to adjust the cable length.
Test the operation of the OPC handle.
• When the bail is open, the engine must not start.
• When the bail is closed, the engine will start.
• When the bail is released, the engine must stop.
en-31
Cable
Adjuster
Upper Slot
Lower Slot