Place Or Mount Your Cameras - NETGEAR arlo pro Quick Start Manual

Place or Mount Your Cameras

6
You can place your camera on a shelf or other flat surface, or you
can mount it to the wall.
Tip: Use the Arlo app in Position mode
(found in Camera Settings) to help aim the camera.
¾ To mount your camera to the wall:
Fasten the mounting screw into the wall,
and hang the magnetic mount from the
screw.
If you're mounting the camera to drywall, be
sure to use the plastic drywall anchors that
are provided.
12
Charge Your Arlo Pro Battery
7
The Arlo Pro battery is fully charged when it leaves the factory.
¾ To recharge the battery:
a. Place the camera indoors. If you are using the camera outside, bring it inside
while charging the battery.
b. Connect the power adapter cable to the camera power adapter.
Note: You must use an Arlo Pro power adapter and cable to charge the
battery.
c. Connect the other end of the adapter cable to the camera.
d. Plug the power adapter into an electrical outlet.
The camera LED lights solid blue when the
camera battery is fully charged.
13