Meru Networks AP1010i Installation Manual page 8

Installing AP1000
Figure 32: Install AP1000 Below a Suspended Ceiling 247
AP1000
4. Press down on the tab indicated in
5. Connect one end of the CAT5 (or greater) Ethernet cable with PoE to the 100/1000 Ethernet
connector shown in
Caution!
mistakenly be plugged into the Console port; if you do this, the AP won't power up.
Figure 33: AP1000 Ethernet Port
6. If you want to lock AP1000 in place, use the supplied locking tool to press the AP1000 locking
mechanism shown in
60 Meru Access Point Installation Guide
AP1000 Beta Test
(in ceiling)
Figure 32
Figure 33 below.
Be sure to connect the Ethernet cable to the Ethernet port. The cable can
Figure 34.
above and rotate the AP1000 into place.
7
© 2010 Meru Networks, Inc.