Meru Networks AP1010i Installation Manual page 10

Installing AP1000
Mount AP1000 on a Wall
The AP1000 attaches directly to the wall. To mount an AP1000 on sheetrock or wall studs, follow these
steps:
1. Attach two appropriate screws (see
inches apart (76mm) as shown below
Figure 35: AP1000 Wall Bracket
Wall mount with screws.
2. Check to be sure that AP1000 is not locked by inserting the locking key into the Unlock mechanism
as shown below.
Figure 36: Unlock AP1000
Key
62 Meru Access Point Installation Guide
AP1000 Beta Test
Additional Equipment
(Figure
UNLOCK
for screw information) to the wall 3
35).
9
© 2010 Meru Networks, Inc.