Meru Networks AP1010i Installation Manual page 11

3. Attach the PoE Ethernet cable to the Ethernet port shown in
Caution!
mistakenly be plugged into the Console port; if you do this. the AP won't power up.
Figure 37: AP1000 Ethernet Port
4. Align the tabs on the wall bracket with the tabs on the wall and slide the unit down slightly. See
Figure 35.
Mount AP1000 on a Wall Using the Optional Locking Kit
The AP1000 locking wall mount kit (840-00052 ACC-MNT-AP1000-01)contains a wall bracket, screws,
and a locking key. To mount an AP1000 on sheetrock or wall studs with this kit, follow these steps:
1. Check to be sure that AP1000 is not locked by inserting the locking key into the Unlock mechanism
as shown below.
Figure 38: Unlock AP1000
UNLOCK
Key
© 2010 Meru Networks, Inc.
AP1000 Beta Test
Be sure to connect the Ethernet cable to the Ethernet port. The cable can
Figure 37.
10
Installing AP1000
Installing AP1000 63