•
lock state: set display Lock, Unlock.
Modify Lock Code: Modify the lock code.
•
WiMAX Panel
Authentication Settings: Set or display authentication parameters, as User Name, Password, EAP Type,
•
CA Certificate, Anonymous Identity, Device Certificate, Device Private Key, and Device Private Key
Password.
Signal Strength: Display signal and connect info, as CINR, RSSI, RX Rate, TX Rate, TXPWR, NAPID,
•
and NSPID.
Base Station and Device Info: Display base station and device Info, as BS ID, Center Frequency,
•
Firmware Version, MAC Address, Device Temperature, MRU, and Device State.
Network Info: Display network info, as IP, DNS, Gateway, and Connect Status.
•
Version Info: Display version info, as Software, Hardware, Driver, and Library.
•
Save: Save authentication parameters.
•
•
Connect: Connect/Disconnect from the Internet.
14 Confidential and Proprietary Information of ZTE CORPORATION
ZTE AD226 User Manual