B+B SmartWorx SEG510-2SFP-T User Manual page 53

Table 52: System (Continued)
Function
show flash
clear line telnet
terminal length <0-24>
show network-port
[no] network-port type
(http|https|telnet|ssh)
network-port type
(http|https|telnet|ssh)
port-num <1-65535>
system name NAME
system location LOCA-
TION
system contact CON-
TACT
Privilege Description
User EXEC Use "show flash" command
to show all files" status
which stored in flash.
Admin EXEC
User EXEC
User EXEC Show network port informa-
tion.
Admin EXEC Use no form to restore
default value.
Admin EXEC Use the command to
change network port.
Admin EXEC Use "system name" com-
mand to modify system
name information of the
switch.
Admin EXEC Use "system contact" com-
mand to modify contact
information of the switch.
Admin EXEC Use "system location" com-
mand to modify location
information of the switch.
46
CLI
Example
switch# show flash
switch(config)# no network-
port type http
switch(config)# network-port
type http port-num 8080
switch(config)# system name
myname
switch(config)# system con-
tact callme
switch(config)# system loca-
tion home