System Log (Syslog); System Time; Table 36: System Log (Syslog); Table 37: System Time - B+B SmartWorx SEG510-2SFP-T User Manual

System Log (SYSLOG)

Table 36: System Log (SYSLOG)

Function
show logging
show logging (buff-
ered|file)
clear logging (buff-
ered|file)
[no] logging
logging host
(A.B.C.D|HOSTNAME)
[port <0-65535>] [sever-
ity <0-7>] [facility
(local0|local1|local2|loca
l3|local4|local5|local6|loc
al7)]
logging (buffered|con-
sole|file) [severity <0-7>]
no logging (buff-
ered|console|file)
no logging host
(A.B.C.D|HOSTNAME)

System Time

Table 37: System Time

Function
clock source (local|sntp) Admin EXEC
clock timezone ACRO-
NYM HOUR-OFFSET
[minutes <0-59>]
Privilege Description
User EXEC Display the global logging
status.
User EXEC Display log of buffer or file. switch# show logging buffered
Admin EXEC Clear logging information.
Admin EXEC Disable or enable logging
service.
Admin EXEC Set remote log server infor-
mation and specify the mini-
mum severity mask and
facility of logging message.
Admin EXEC Enable logging into buffer
or console of file and spec-
ify the minimum severity
mask of logging message.
Admin EXEC Disable logging into buffer
or console or file.
Admin EXEC Remove remote log server. switch(config)# no logging host
Privilege Description
Set the source of time.
Use the no form of this
command to select the
default setting.
Admin EXEC Use the clock timezone
command to set timezone
setting.
35
CLI
Example
switch# show logging
switch# clear logging buffered
switch(config)# logging
switch(config)# logging host
192.168.1.100 severity 6 facil-
ity local0
switch(config)# logging buff-
ered severity 6
switch(config)# no logging buff-
ered
192.168.1.100
Example
switch(config)# clock source
sntp
switch(config)# show clock
detail
08:32:12 test(UTC+5) Sep 21
2012
No time source
Time zone:
Acronym is DFL
Offset is UTC+8
switch(config)# clock timezone
test +5
switch(config)# show clock
detail
10:13:27 test(UTC+5) Sep 21
2012
No time source
Time zone:
Acronym is test
Offset is UTC+5