B+B SmartWorx SEG510-2SFP-T User Manual page 27

Table 17: MLD Snooping (Continued)
Function
clear ip mld snooping
groups [(dynamic
|static)]
clear ip mld snooping
statistics
[no] ip mld snooping
[no] ip mld snooping
report-suppression
[no] ip mld snooping
vlan VLAN-LIST static-
group X:X::X:X inter-
faces IF_PORTS
no ip mld snooping vlan
VLAN-LIST group
X:X::X:X
Privilege Description
Admin EXEC This command will clear the
IP MLD groups for dynamic
or static ports, or for all
types.
Admin EXEC This command will clear the
MLD statistics.
Admin EXEC "No IP MLD snooping" will
clear all IP MLD snooping
dynamic groups and
dynamic router ports, and
make the static IP MLD
group invalid. Subse-
quently, the dynamic group
and router ports will not be
learned via MLD message.
Admin EXEC "No IP MLD snooping
report-suppression" will dis-
able MLD v1/v2 MLD report
suppression function.
Reports received will be for-
warded to the VLAN router
ports.
Admin EXEC "IP MLD snooping vlan 1
static-group ff0e:dd::00:dd
interfaces gi1" will add
static group.
The static group willl not
learn other dynamic ports. If
the dynamic group exists,
the static group will overlap
the dynamic group. If the
last member of the static
group is removed, the static
group will be deleted.
For the static group to be
valid, IGMP snooping VLAN
and IP IGMP snooping
must both be enabled.
Use "Show IP IGMP snoop-
ing group [(dynamic |
static)]" to display the con-
figuration. Use "No IP MLD
snooping vlan 1 group
ff0e:dd::00:dd" or "Clear IP
MLD snooping groups" to
delete the static group.
20
CLI
Example
switch# clear ip mld snooping
groups static
switch# clear ip mld snooping
statistics
switch(config)# ip mld snoop-
ing
switch(config)# no ip mld
snooping
switch(config)# ip mld snoop-
ing report-suppression
switch(config)# no ip mld
snooping report-suppression
switch(config)# ip mld snoop-
ing vlan 1 static-group
ff0e:dd::00:dd interfaces gi1-2